Close
COCH® DLY-200 8in Head-Swiveling Frequency Conversion Industrial V-Belt Rotary Band Saw Machine
caroline li, 15167911586, dly@baishide.com
COCH® DLY-200 scissor-type corner variable frequency band sawing machine is a high-tech product developed by our company. This product has changed the heavy manual cycle operation of old-fashioned sawing equipment for many years and filled the domestic blank. This machine tool has reasonable structure, stable technical performance, convenient operation and high sawing precision. This machine is the most ideal equipment for large and medium-sized enterprises to cut materials in large quantities. The 8-inch cutting range provides greater cutting capacity than comparable saws on the market. The cutting angle can be easily changed by rotating the saw frame. Workpiece clamping adopts hydraulic system. Equipped with frequency conversion speed regulation system, multi-speed speed regulation can be carried out according to cutting needs. It has the characteristics of compact structure and convenient operation and maintenance.
Inquiry Now
About us
SPECIFICATION
| Rated voltage | 220V |
| Rated attack rate | 1100w |
| Transmission mode | Belt 12-speed speed regulation30Hz: 22~27~38~62m/min50Hz: 36 ~ 46~63~103m/min30Hz: 52~ 63-89 -142m/min |
| Saw blade dimensions | 0.9x27x2360mm |
| Cutting range: | 0 Degree: Square material 200x200mmRound diameter 200mmRectangular material 300x180mm45 Degrees: Square material 120x120mmRound diameter 120mmRectangular material 130x120mm |
| Machine dimensions | 1350x500x1070mm |
| Package dimensions | 1370x520x1090mm |
| Product packaging: | Multi-layer wooden box with steel bar edge |
DESCRIPTIONS
1. High power 1100w motor, strong cutting power.
2. 12v low voltage saw blade up tight indication and 12v low voltage safety water pump, very safe.
3. Humanized design: saw blade installation in place, there is an indicator light to ensure safety
4. Automatic power off after use.
5. Equipped with angle table and workpiece fixing device, can be 0-45 degrees angle cutting.
6. Cuttable materials: stainless steel, chrome alloy, nickel-based alloy, carbon steel, angle steel, structural steel, aluminum, copper, fiberglass, plastic, cable, wood, etc.! Solid materials to profiles and thin-walled tubes on one machine.
7. Add coolant circulation system to improve the service life of saw blade.
8. Installed oil cylinder, greatly improve the accuracy of cutting thin-walled pipe, so that thin-walled pipe without deformation, no burr, cutting without error.
9. At the same time, it is equipped with belt gearbox and frequency conversion speed control system, which can adjust the speed in twelve steps to meet different cutting needs.
10. Add the power distribution box, always protect the operation safety.
11. Saw head can swivel, do not move the material to be processed multi-angle quick cutting.
INQUIRY NOW
Please give us a message for your inquiry . order or advice. Thanks a lot.
Send Message
RELATED PRODUCTS
